На производстве
Применения
Руководства по подбору и заметки по применению — как инженеры в упаковке, пищевой промышленности, фармацевтике, полупроводниках и тяжёлой промышленности подбирают насосы и воздуходувки Dr.Vakuum, с расчётами.
Semiconductor back-end (OSAT): die attach, transfer moulding and wafer handling
Thailand's semiconductor industry is the back end — the assembly and test plants that take finished wafers and turn them into packaged chips. Vacuum handles the wafer on the dicing saw and the die on the bonder collet, pulls the voids out of the mould compound and the underfill, dries the parts before moulding and holds the strips on every stage. Shallow, clean, fast and continuous, with a few deep process steps — and the Dr.Vakuum DRV, CL and DSI pumps that serve them from the subfab.
High vacuum for coating and analytical instruments: turbo, cryo and the backing pump
Below 10⁻³ mbar the pump set becomes a system — a turbomolecular or cryogenic high-vacuum pump that cannot exhaust to atmosphere, and a backing pump whose curve decides how well the turbo works. Compression ratio, foreline pressure, cryopump regeneration and sizing the forevacuum for a sputter coater or an electron microscope.
Откачка шлюза на полупроводниковой задней сборочной линии
Линия проволочной разварки выбрала насосы Dr.Vakuum DV30 для шлюзовых камер — чистая, быстрая откачка с опцией газового балласта, предотвращающей загрязнение масла конденсатом.