Dr.Vakuum

การใช้งานจริง

การประยุกต์ใช้งาน

คู่มือการเลือกขนาดและบันทึกการประยุกต์ใช้งาน — วิศวกรโรงงานในอุตสาหกรรมบรรจุภัณฑ์ อาหารและเครื่องดื่ม ยา เซมิคอนดักเตอร์ และอุตสาหกรรมหนัก กำหนดสเปกปั๊มและโบลเวอร์ Dr.Vakuum อย่างไร พร้อมแสดงวิธีคำนวณ

Vacuum wood drying kilns: drying rubberwood and hardwood in days, not weeks
อ่าน 7 นาที ภาษาอังกฤษ

Vacuum wood drying kilns: drying rubberwood and hardwood in days, not weeks

A vacuum kiln dries timber at 40–60 °C by lowering the boiling point of the water in the wood, cutting a four-week conventional schedule for 50 mm rubberwood to four or five days with fewer checks and less colour change. How the pressure, temperature and heating method interact, the vapour load that sizes the condenser and the pump, continuous versus cyclic vacuum, resin and acid vapour from tropical hardwoods, and the Dr.Vakuum liquid ring and oil-sealed pumps for a 20 m³ kiln.

Woodworking
Plywood, veneer and laminate pressing: vacuum lay-up, membrane presses and veneer handling
อ่าน 7 นาที ภาษาอังกฤษ

Plywood, veneer and laminate pressing: vacuum lay-up, membrane presses and veneer handling

Thailand's rubberwood furniture and plywood industry uses vacuum where a flat press cannot reach — the membrane press that wraps a veneer or a PVC foil over a shaped door, the vacuum bag that bends a curved plywood chair shell, and the suction cups and tables that move and hold veneer sheets too thin and brittle to grip. Pressures from −300 to −950 mbar, glue vapour and wood dust in the pump, and the Dr.Vakuum V and 1SC machines for a kitchen-door line.

Woodworking
Glass, brick and ceramics: vacuum holding, forming and clay de-airing
อ่าน 7 นาที ภาษาอังกฤษ

Glass, brick and ceramics: vacuum holding, forming and clay de-airing

Three industries, three shallow-vacuum duties with abrasive dust in common. Suction cups lifting and positioning glass sheets, vacuum-assisted forming of sanitaryware and tableware, and the de-airing chamber on a brick and tile extruder that removes air from the clay column so the fired product is dense and crack-free. Flow-not-depth sizing, protecting blowers and pumps from silica and clay dust, and the Dr.Vakuum 1SC, CB, V and liquid ring machines for each.

โลหะและโรงหล่อWoodworking
ระบบสุญญากาศกดติดบนเร้าเตอร์ CNC ที่โรงงานเฟอร์นิเจอร์
อ่าน 1 นาที

ระบบสุญญากาศกดติดบนเร้าเตอร์ CNC ที่โรงงานเฟอร์นิเจอร์

ผู้ผลิตเฟอร์นิเจอร์ตามสั่งเปลี่ยนจากปั๊ม oil-sealed ที่หมดอายุการใช้งานเป็น CR Series claw — กำจัดการปนเปื้อนน้ำมันบนไม้ที่มีรูพรุน และไม่ต้องเปลี่ยนน้ำมันเป็นเวลาหกเดือน (เพราะไม่มีน้ำมัน)

Woodworking