การใช้งานจริง
การประยุกต์ใช้งาน
คู่มือการเลือกขนาดและบันทึกการประยุกต์ใช้งาน — วิศวกรโรงงานในอุตสาหกรรมบรรจุภัณฑ์ อาหารและเครื่องดื่ม ยา เซมิคอนดักเตอร์ และอุตสาหกรรมหนัก กำหนดสเปกปั๊มและโบลเวอร์ Dr.Vakuum อย่างไร พร้อมแสดงวิธีคำนวณ
Central vacuum cleaning systems for plants and warehouses
A central vacuum cleaning system puts a hose inlet every 30 metres through a factory and a separator and blower in a plant room — so housekeeping of flour, sugar, cement, plastic pellets or wood dust happens without portable machines that blow fine dust back into the air. Sized by simultaneous operators, not floor area; the −200 to −400 mbar window; separator and filter design for explosible dusts; and the Dr.Vakuum 1SC, 2SC and RBV machines for two to twenty operators.
Boiler feedwater and membrane deaeration: removing oxygen before it removes the boiler
Dissolved oxygen at 10 ppb pits a boiler tube; at 8 ppm it destroys a feedwater system in a season. Deaeration removes it by stripping — with steam in a tray or spray deaerator, or with vacuum through a hollow-fibre membrane contactor — and in both cases a vacuum pump removes the stripped gas. Vacuum deaerators, the membrane contactor's vacuum-plus-sweep-gas duty, dissolved CO₂ for water treatment and bottling, sizing from the water flow, and the Dr.Vakuum LM and LS pumps.
Egg, dairy and liquid food: vacuum evaporation and concentration
Condensed milk, coconut cream, fruit concentrate and liquid egg are all made by boiling water off at 40–70 °C under vacuum, where heat-sensitive proteins and flavours survive. Falling-film and forced-circulation evaporators, the condenser-and-pump arithmetic, non-condensables, product carry-over and CIP, sized for a 10 t/h multi-effect dairy evaporator.
Fish meal, pet food and aquafeed: vacuum coating of fat and flavour
A vacuum coater soaks fat and liquid flavour deep into an extruded pellet instead of leaving it on the surface — 20–40 % oil in a salmon or shrimp feed, palatants in a kibble. The duty is a batch chamber full of hot, oily, dusty pellets at 100–300 mbar; sizing by cycle, keeping oil mist and fines out of the pump, and the Dr.Vakuum dry vane, claw and Roots options.
Beverage deaeration and beer bottling vacuum: oxygen is the enemy
Dissolved oxygen above 50 ppb shortens a beer's shelf life by months and oxidises juice colour and vitamin C; every modern filling hall fights it with vacuum. Deaeration of brewing and blending water, vacuum pre-evacuation of bottles and cans before CO₂ purge, and the pumps that do it wet, cold and oil-free — sized for a 40,000 bottle-per-hour line.
Instant noodle and dry pasta lines: vacuum mixing and vacuum drying
Vacuum mixing gives noodle dough a tighter gluten network and a translucent, chewy strand; vacuum drying takes non-fried noodles and pasta to 12 % moisture at 60 °C without case-hardening. Two duties, two pumps — the dough mixer's short cycle at 100–300 mbar and the dryer's continuous vapour load at 30–60 mbar — sized for a 20-tonne-a-day line.
Poultry processing: evisceration, giblet and offal vacuum systems
A poultry line at 13,500 birds an hour uses vacuum to pull lungs and kidneys from the carcass, convey giblets, crops and offal to the by-product room, and keep the evisceration area clean. The duty is shallow, high-flow and relentlessly wet — blood, water and tissue in every litre of air. Why liquid ring pumps own it, sizing by nozzles and transport lines, and the separator design that decides uptime.
Vacuum cooling of cooked rice, bakery and ready meals
Vacuum cooling takes a tray of cooked rice from 95 °C to 10 °C in fifteen minutes by boiling its own moisture off at falling pressure. The physics, the 1 % weight loss per 6 °C, the enormous vapour volumes that make the condenser the real machine, the pump that handles the non-condensables and the final 6 mbar, and sizing for a 500 kg batch chamber.
Vacuum (suction) conveying of rice, sugar and plastic granules
Suction conveying moves bulk solids by pulling air through the pipe ahead of them, so a leak lets air in rather than product out — the reason it owns multi-pick-up, hygienic and toxic duties. Dilute versus dense phase, the 200–500 mbar window, sizing the air flow from the solids rate and the filter receiver from the air flow, and the Dr.Vakuum 1SC, 2SC and RBV machines.
Vacuum tumbling and marination: what the vacuum does and how to size the pump
Vacuum tumblers open the muscle fibre so brine goes in faster and stays in, but only if the drum reaches and holds the right pressure through a wet, foaming, protein-laden cycle. The pressure profile, the pump-down time that sets drum throughput, why the pump must be oil-free, and the Dr.Vakuum DRV and V machines for 100 to 3,000 litre drums.
Deodorisation and bleaching vacuum in palm oil refining
A palm oil refinery's deodoriser runs at 2–5 mbar and 240–260 °C with stripping steam and fatty acid vapour in the gas; the bleacher at 50–100 mbar with bleaching-earth dust. Steam ejectors, liquid ring, and the dry-condensing hybrid that is replacing them — sized for a 1,000 t/d refinery.
Vacuum packaging of frozen seafood and meat: sizing the chamber machine pump
Cycle time, not ultimate pressure, sizes a chamber vacuum packer — and frozen product adds a water-vapour load that oil-sealed pumps must be run correctly to survive. Sizing by chamber volume and cycles per hour, gas-flush MAP, and washdown-proof installation.
Vacuum in canning: can seaming, retort and juice deaeration
The three vacuum duties in a cannery — headspace vacuum at the seamer, vacuum in the retort cycle, and deaeration of juices and purées — what pressure each needs, how to size for a 600-can-per-minute line, and why the seamer pump must be oil-free.
Vacuum for sugar mill evaporators and vacuum pans
How a sugar factory's evaporator station and vacuum pans make vacuum, why the condenser does most of the work and the pump handles only the non-condensables, how to size a liquid ring pump for a Thai crushing season, and where multi-jet ejectors lose.
ไลน์ thermoforming สำหรับอาหารพร้อมรับประทานบรรจุ MAP
ผู้ผลิตอาหารพร้อมรับประทานในภูมิภาคเปลี่ยนปั๊ม rotary vane เก่า 3 ตัวด้วย MB-Series mechanical booster + V0301 ตัวเดียว — ลดเวลาวงจร 22% และน้ำมัน 60%
การลำเลียงแบบ pneumatic ที่โรงสีแป้ง — ไซด์แชนเนลโบลเวอร์
โรงสีแป้ง 24 ตัน/ชม. เปลี่ยน positive-displacement blower เก่า 2 ตัวด้วย SC Series side channel blower 3 ตัว — เงียบกว่า ไร้น้ำมัน ไม่ต้องวางฐานราก