Central vacuum cleaning systems for plants and warehouses
Walk into a flour mill, a sugar packing plant, a cement bagging hall or a plastics compounding plant in Thailand and look at the floor and the ledges. The dust on them is the plant's housekeeping problem, a hygiene audit item, a slip hazard, and — for flour, sugar, wood and many plastics — an explosion hazard: a 1 mm layer of combustible dust on the surfaces of a room is enough fuel for a secondary explosion. Brooms and compressed air move the dust into the air; portable vacuum cleaners move most of it into a bag and the finest fraction back out through their filters. A central vacuum cleaning system moves it through a pipe to a separator in another room, where one filter — a good one — deals with it. The system is a vacuum conveying system for a product nobody wants, and it is sized the same way.
1. How the system is laid out
- Inlet valves on a pipe network through the plant, one every 25–40 m so a 10–15 m hose reaches everywhere; each inlet a self-closing valve with a microswitch (or a simple cover).
- Hoses and tools: 38–50 mm hose, floor nozzles, crevice tools, a wand with a 50 mm bore for coarse spill.
- Pipework: steel or stainless, 50–150 mm, smooth bore, long-radius bends, sloping where possible — no pockets where product settles.
- Pre-separator (optional, for heavy spill): a drum or hopper at the inlet of the main line that drops out the bulk before the pipe.
- Separator / filter receiver in the plant room: a cyclone or a settling vessel with cartridge or bag filters, pulse-cleaned, with a discharge drum, bin or rotary valve beneath.
- Secondary (safety) HEPA filter downstream of the receiver, so a burst filter element does not send dust into the blower and out the exhaust.
- Blower: side channel or Roots vacuum blower with a relief valve, inlet silencer, and the exhaust ducted outside.
Why is the system sized by operators, not by floor area?
Because the system does no work when no one is holding a hose. Air flows only through the inlets that are open, and each open hose draws a fixed air flow set by its diameter and the vacuum level — about 150–250 m³/h for a 38 mm hose, 250–350 m³/h for 50 mm at −250 mbar. A plant that will have two cleaners working at once needs a blower for two hoses, whether the plant is 1,000 m² or 20,000; the floor area sets the pipe network length and the number of inlets, which set the pipe size and the pressure drop, but not the blower's air flow. Size for one hose more than the number of simultaneous operators the plant will actually have (the spare keeps the velocity up when one hose is partly blocked), and no more: an oversized system wastes energy every hour it runs and makes the hoses hard to hold against the floor.
2. Sizing
A rice-cracker and biscuit plant, 8,000 m², flour and sugar dust, three cleaners on the night shift, 50 mm hoses, longest pipe run 180 m with 12 bends.
- Air flow: 4 hoses (3 + 1 spare) × 300 m³/h = 1,200 m³/h of free air.
- Pipe size for a transport velocity of 20–25 m/s (enough to keep flour and crumbs moving, below the 30 m/s that erodes bends): main line 1,200 m³/h at 22 m/s → 0.0152 m² → 140 mm (DN150); branches to two inlets 600 m³/h → 100 mm; drops to a single inlet 65–80 mm.
- Pressure drop budget at the blower:
- Hose and tool (the dominant loss — 15 m of 50 mm hose at 300 m³/h): ~120 mbar
- Pipework, 180 m with 12 bends with dust: ~60 mbar
- Separator and primary filter, dirty: ~40 mbar
- HEPA secondary filter: ~15 mbar
- Total ≈ 235 mbar → design the blower for −280 mbar with margin for filter loading.
- Blower: 1,200 m³/h free air (≈ 1,650 m³/h actual at −280 mbar) at −280 mbar. That is beyond a single-stage side channel blower (the 1SC929 gives 1,134 m³/h free air to ~300 mbar, and would be at the end of its curve); a Roots vacuum blower — RBV125 (up to ~1,200 m³/h at −490 mbar maximum) or RBV150 (799–1,910 m³/h) — delivers the flow at the vacuum with the near-vertical curve that keeps hose velocity constant as filters load. For a smaller plant with one or two operators, a 2SC6375 (312 m³/h, 420–580 mbar) or 2SC8415 (852 m³/h, 260 mbar) side channel blower is the quieter and cheaper machine.
The pattern, by simultaneous operators:
| Operators | Free air at −250 to −300 mbar | Blower |
|---|---|---|
| 1 (38 mm hose) | 200–250 m³/h | 2SC4337 or 2SC6375 |
| 2 (50 mm) | 600–700 m³/h | 2SC8415 or RBV065 |
| 3–4 | 1,000–1,300 m³/h | RBV100 / RBV125 |
| 5–8 | 1,600–2,500 m³/h | RBV150 / RBV200 |
| 10–20 (large warehouse, VSD) | 3,000–6,000 m³/h | 2 × RBV200 on VSD |
3. The separator and the explosible-dust rules
Flour, sugar, starch, milk powder, wood, most plastics, aluminium and many pharmaceutical powders are combustible dusts, and the separator is where they concentrate. The system is designed to ATEX / NFPA 652 principles:
- The separator vessel is explosion-vented (a rupture panel to a safe outside location) or explosion-suppressed, or built to withstand the deflagration pressure.
- Earth bonding of every pipe, hose (conductive hose), tool and the vessel; the hose is the usual static source.
- No ignition source in the airstream: the blower is downstream of the HEPA filter (the clean side), and is a non-sparking design; the separator has no motor inside the dust zone.
- Filter media anti-static; cleaning by reverse pulse rather than shaking.
- Isolation: a flap valve or rotary valve between the separator and the pipe network so a deflagration in the vessel does not propagate into the plant.
- Housekeeping of the system itself: the discharge bin emptied on a schedule, the separator inspected, the filters' differential logged.
The separator is sized for an air-to-cloth ratio of 1–1.5 m/min on fine, light dusts (flour, milk powder) and 2–3 on coarse ones (pellets, wood chips), with a settling velocity under 1.5 m/s in the body. A cyclone pre-separator ahead of the filter vessel earns its cost wherever the dust is heavy — cement, sugar, pellets — by taking 90 % of the mass out before the filters see it.
4. Operating details
- Inlet valve interlock: the blower starts when an inlet is opened (microswitch) and stops after a delay; or runs on a shift timer. A Roots blower on a VSD follows the number of open inlets by holding the header vacuum constant — the single largest energy saving.
- Relief valve on the blower inlet set 50 mbar above design: with every inlet closed and the blower running, a side channel blower overheats and a Roots blower overloads.
- Hose length discipline: the 120 mbar of hose loss assumed above doubles with 30 m of hose; long hoses mean a blower sized for them or a cleaner who gives up.
- Wet pick-up: a system that must also take water (washdown recovery in a food plant) needs a liquid separator with a level switch before the filter vessel — and a blower that never sees liquid; or a separate liquid ring unit for the wet duty.
- Noise: a Roots blower set is 85–95 dB(A) without silencers; in a plant room with inlet and outlet silencers and an acoustic enclosure, under 75 at the door.
5. Worked plants
| Plant | Dust | Operators | Run | Dr.Vakuum answer |
|---|---|---|---|---|
| Bakery, 3,000 m² | Flour, sugar | 1–2 | 120 m | 2SC8415, vented cyclone-filter, HEPA |
| Biscuit plant (above), 8,000 m² | Flour, sugar, crumbs | 3 | 180 m | RBV125, cyclone + vented filter vessel, HEPA, VSD |
| Plastics compounding, 5,000 m² | Pellets, powder additives | 2 | 150 m | RBV065, pre-separator drum, filter vessel |
| Cement bagging hall | Cement, abrasive | 2 | 200 m | RBV100, heavy cyclone, abrasion-resistant bends |
| Pharma OSD facility, 4,000 m² | API and excipient powders, containment | 2 | 100 m | 2SC6375 × 2 (zoned), bag-in/bag-out HEPA, suppressed vessel |
| Distribution warehouse, 30,000 m² | General | 6 | 400 m | 2 × RBV200 on VSD, two filter vessels |
Recommended Dr.Vakuum machines
Roots vacuum blowers (RBV Series) — three operators and up, constant velocity as filters load, VSD: RBV065, RBV100, RBV125, RBV150, RBV200.
Two-stage side channel blowers (2SC Series) — one or two operators, quiet, oil-free: 2SC4337, 2SC6375, 2SC8415.
The same pipe-and-blower arithmetic for a product you do want is in Vacuum (suction) conveying of rice, sugar and granules.
Plant to system. Send us a floor plan, the dusts, and how many cleaners work at once, and we will return the inlet layout, pipe sizes, separator and blower — with the explosion-protection measures the dust requires. Talk to an engineer.