Dr.Vakuum

Im Einsatz

Anwendungen

Auslegungshilfen und Anwendungsberichte — wie Anlageningenieure in Verpackung, Lebensmittel, Pharma, Halbleiter und Schwerindustrie Dr.Vakuum-Pumpen und Gebläse spezifizieren, mit vorgerechneter Auslegung.

Central vacuum cleaning systems for plants and warehouses
7 Min. Lesezeit Auf Englisch

Central vacuum cleaning systems for plants and warehouses

A central vacuum cleaning system puts a hose inlet every 30 metres through a factory and a separator and blower in a plant room — so housekeeping of flour, sugar, cement, plastic pellets or wood dust happens without portable machines that blow fine dust back into the air. Sized by simultaneous operators, not floor area; the −200 to −400 mbar window; separator and filter design for explosible dusts; and the Dr.Vakuum 1SC, 2SC and RBV machines for two to twenty operators.

Food & BeveragePneumatic ConveyingVersorgung & Energie
Fish meal, pet food and aquafeed: vacuum coating of fat and flavour
7 Min. Lesezeit Auf Englisch

Fish meal, pet food and aquafeed: vacuum coating of fat and flavour

A vacuum coater soaks fat and liquid flavour deep into an extruded pellet instead of leaving it on the surface — 20–40 % oil in a salmon or shrimp feed, palatants in a kibble. The duty is a batch chamber full of hot, oily, dusty pellets at 100–300 mbar; sizing by cycle, keeping oil mist and fines out of the pump, and the Dr.Vakuum dry vane, claw and Roots options.

Food & BeveragePneumatic Conveying
Vacuum (suction) conveying of rice, sugar and plastic granules
7 Min. Lesezeit Auf Englisch

Vacuum (suction) conveying of rice, sugar and plastic granules

Suction conveying moves bulk solids by pulling air through the pipe ahead of them, so a leak lets air in rather than product out — the reason it owns multi-pick-up, hygienic and toxic duties. Dilute versus dense phase, the 200–500 mbar window, sizing the air flow from the solids rate and the filter receiver from the air flow, and the Dr.Vakuum 1SC, 2SC and RBV machines.

Food & BeveragePlastics & CompositesPneumatic Conveying
Pneumatische Förderung in einer Mehlmühle — Seitenkanalverdichter
1 Min. Lesezeit

Pneumatische Förderung in einer Mehlmühle — Seitenkanalverdichter

Eine Mehlmühle mit 24 t/h ersetzte zwei alternde Verdrängergebläse durch drei SC-Serie Seitenkanalverdichter — leiser, ölfrei, ohne Fundamentarbeiten.

Food & BeveragePneumatic Conveying