Dr.Vakuum

Im Einsatz

Anwendungen

Auslegungshilfen und Anwendungsberichte — wie Anlageningenieure in Verpackung, Lebensmittel, Pharma, Halbleiter und Schwerindustrie Dr.Vakuum-Pumpen und Gebläse spezifizieren, mit vorgerechneter Auslegung.

Vacuum wood drying kilns: drying rubberwood and hardwood in days, not weeks
7 Min. Lesezeit Auf Englisch

Vacuum wood drying kilns: drying rubberwood and hardwood in days, not weeks

A vacuum kiln dries timber at 40–60 °C by lowering the boiling point of the water in the wood, cutting a four-week conventional schedule for 50 mm rubberwood to four or five days with fewer checks and less colour change. How the pressure, temperature and heating method interact, the vapour load that sizes the condenser and the pump, continuous versus cyclic vacuum, resin and acid vapour from tropical hardwoods, and the Dr.Vakuum liquid ring and oil-sealed pumps for a 20 m³ kiln.

Woodworking
Plywood, veneer and laminate pressing: vacuum lay-up, membrane presses and veneer handling
7 Min. Lesezeit Auf Englisch

Plywood, veneer and laminate pressing: vacuum lay-up, membrane presses and veneer handling

Thailand's rubberwood furniture and plywood industry uses vacuum where a flat press cannot reach — the membrane press that wraps a veneer or a PVC foil over a shaped door, the vacuum bag that bends a curved plywood chair shell, and the suction cups and tables that move and hold veneer sheets too thin and brittle to grip. Pressures from −300 to −950 mbar, glue vapour and wood dust in the pump, and the Dr.Vakuum V and 1SC machines for a kitchen-door line.

Woodworking
Glass, brick and ceramics: vacuum holding, forming and clay de-airing
7 Min. Lesezeit Auf Englisch

Glass, brick and ceramics: vacuum holding, forming and clay de-airing

Three industries, three shallow-vacuum duties with abrasive dust in common. Suction cups lifting and positioning glass sheets, vacuum-assisted forming of sanitaryware and tableware, and the de-airing chamber on a brick and tile extruder that removes air from the clay column so the fired product is dense and crack-free. Flow-not-depth sizing, protecting blowers and pumps from silica and clay dust, and the Dr.Vakuum 1SC, CB, V and liquid ring machines for each.

Metall & GießereiWoodworking
CNC-Fräser-Vakuumspannung in einer Möbelfabrik
1 Min. Lesezeit

CNC-Fräser-Vakuumspannung in einer Möbelfabrik

Ein Maßmöbelhersteller wechselte von einer verschlissenen ölgedichteten Pumpe zu einer CR-Serie Klauenpumpe — wodurch Ölverunreinigungen auf porösem Holz beseitigt wurden und sechs Monate ohne Ölwechsel vergingen (weil kein Öl vorhanden ist).

Woodworking