现场应用
应用案例
选型指南与应用说明 — 包装、食品饮料、制药、半导体和重工业的工程师如何为 Dr.Vakuum 真空泵和鼓风机确定规格,并给出完整计算过程。
Semiconductor back-end (OSAT): die attach, transfer moulding and wafer handling
Thailand's semiconductor industry is the back end — the assembly and test plants that take finished wafers and turn them into packaged chips. Vacuum handles the wafer on the dicing saw and the die on the bonder collet, pulls the voids out of the mould compound and the underfill, dries the parts before moulding and holds the strips on every stage. Shallow, clean, fast and continuous, with a few deep process steps — and the Dr.Vakuum DRV, CL and DSI pumps that serve them from the subfab.
High vacuum for coating and analytical instruments: turbo, cryo and the backing pump
Below 10⁻³ mbar the pump set becomes a system — a turbomolecular or cryogenic high-vacuum pump that cannot exhaust to atmosphere, and a backing pump whose curve decides how well the turbo works. Compression ratio, foreline pressure, cryopump regeneration and sizing the forevacuum for a sputter coater or an electron microscope.
半导体后道工厂的加载锁抽真空
一家引线键合工厂为其加载锁腔选择了 Dr.Vakuum DV30 泵 — 干净、快速抽气,带气镇阀选项可防止可凝结物污染机油。