现场应用
应用案例
选型指南与应用说明 — 包装、食品饮料、制药、半导体和重工业的工程师如何为 Dr.Vakuum 真空泵和鼓风机确定规格,并给出完整计算过程。
EPS and foam moulding: vacuum assist for filling, fusion and cooling
An expanded polystyrene shape-moulding machine makes a fish box or a packaging insert by steaming beads inside a mould and then cooling them — and vacuum is what makes both steps fast and even. Vacuum-assisted filling, vacuum during steaming to pull the steam through the bead mass, and vacuum cooling by boiling the condensate off the mould instead of waiting for it to drain. The wet, hot, steam-and-condensate duty; why liquid ring pumps own it; and sizing for a 1,200 × 1,000 mm machine.
Vacuum bagging, RTM and composite curing: holding −950 mbar for hours
Composite layups cure under a vacuum bag for hours, and the pump that holds them is sized by the leak rate of the bag, not by the part. Pump-down of the bag and resin volatiles, the drop test and leak budget, vacuum infusion and light RTM resin flow, several bags on one pump, and the Dr.Vakuum V and DV pumps for the composites shop.
Extruder vent degassing and PET recycling: vacuum that tolerates oligomers
A vented extruder pulls moisture, monomer and oligomer vapour out of the melt at 5–50 mbar, and what comes out condenses into wax and sticky solids. Why liquid ring pumps survive this and when a dry screw with a hot inlet pays, the vent-port and condenser design that keeps the pump alive, and sizing for a 1,500 kg/h PET recycling line and solid-state polycondensation.
Vacuum (suction) conveying of rice, sugar and plastic granules
Suction conveying moves bulk solids by pulling air through the pipe ahead of them, so a leak lets air in rather than product out — the reason it owns multi-pick-up, hygienic and toxic duties. Dilute versus dense phase, the 200–500 mbar window, sizing the air flow from the solids rate and the filter receiver from the air flow, and the Dr.Vakuum 1SC, 2SC and RBV machines.
注塑工厂集中真空系统
十二台注塑机,一个集中真空回路 — 围绕三台 V0301 泵设计,采用 N+1 冗余。与文丘里式夹持相比,压缩空气消耗降低 40%。