现场应用
应用案例
选型指南与应用说明 — 包装、食品饮料、制药、半导体和重工业的工程师如何为 Dr.Vakuum 真空泵和鼓风机确定规格,并给出完整计算过程。
Vacuum wood drying kilns: drying rubberwood and hardwood in days, not weeks
A vacuum kiln dries timber at 40–60 °C by lowering the boiling point of the water in the wood, cutting a four-week conventional schedule for 50 mm rubberwood to four or five days with fewer checks and less colour change. How the pressure, temperature and heating method interact, the vapour load that sizes the condenser and the pump, continuous versus cyclic vacuum, resin and acid vapour from tropical hardwoods, and the Dr.Vakuum liquid ring and oil-sealed pumps for a 20 m³ kiln.
Plywood, veneer and laminate pressing: vacuum lay-up, membrane presses and veneer handling
Thailand's rubberwood furniture and plywood industry uses vacuum where a flat press cannot reach — the membrane press that wraps a veneer or a PVC foil over a shaped door, the vacuum bag that bends a curved plywood chair shell, and the suction cups and tables that move and hold veneer sheets too thin and brittle to grip. Pressures from −300 to −950 mbar, glue vapour and wood dust in the pump, and the Dr.Vakuum V and 1SC machines for a kitchen-door line.
Glass, brick and ceramics: vacuum holding, forming and clay de-airing
Three industries, three shallow-vacuum duties with abrasive dust in common. Suction cups lifting and positioning glass sheets, vacuum-assisted forming of sanitaryware and tableware, and the de-airing chamber on a brick and tile extruder that removes air from the clay column so the fired product is dense and crack-free. Flow-not-depth sizing, protecting blowers and pumps from silica and clay dust, and the Dr.Vakuum 1SC, CB, V and liquid ring machines for each.
家具厂 CNC 路由器真空夹持
一家定制家具制造商从磨损的油封泵切换到 CR 系列爪式泵 — 消除多孔木材上的油污染,六个月不换油(因为根本没有油)。