现场应用
应用案例
选型指南与应用说明 — 包装、食品饮料、制药、半导体和重工业的工程师如何为 Dr.Vakuum 真空泵和鼓风机确定规格,并给出完整计算过程。
Printing presses and converting: feeder suction and blast air from one machine
A sheet-fed offset press separates, lifts and transports 15,000 sheets an hour with suction and blows them apart with air — and the pump that does both is usually one machine with a vacuum port and a pressure port. Combined vacuum-pressure dry vane pumps, side channel blowers on folders and die-cutters, oil-free because paper dust and ink mist meet in the same room, and sizing by sucker count for a B1 press and a corrugated converting line.
Paper machine vacuum: suction boxes, couch roll and press felts
A paper machine removes most of its water with vacuum long before the dryer section — through flat boxes under the forming wire, the suction couch and pick-up rolls, and the uhle boxes that condition the press felts. It is the largest single vacuum installation in any industry: tens of thousands of cubic metres per hour at 150–650 mbar, water-saturated, carrying fibre and filler, running 350 days a year. Why liquid ring pumps have held this ground, the vacuum levels per position, separator design, seal water and energy, and the Dr.Vakuum LS and LT machines for a tissue or packaging machine.