Dr.Vakuum

In the field

Applications

Sizing guides and application notes — how plant engineers across packaging, food & beverage, pharma, semiconductor and heavy industry specify Dr.Vakuum pumps and blowers, with the arithmetic shown.

EPS and foam moulding: vacuum assist for filling, fusion and cooling
7 min read

EPS and foam moulding: vacuum assist for filling, fusion and cooling

An expanded polystyrene shape-moulding machine makes a fish box or a packaging insert by steaming beads inside a mould and then cooling them — and vacuum is what makes both steps fast and even. Vacuum-assisted filling, vacuum during steaming to pull the steam through the bead mass, and vacuum cooling by boiling the condensate off the mould instead of waiting for it to drain. The wet, hot, steam-and-condensate duty; why liquid ring pumps own it; and sizing for a 1,200 × 1,000 mm machine.

PackagingPlastics & Composites
Printing presses and converting: feeder suction and blast air from one machine
7 min read

Printing presses and converting: feeder suction and blast air from one machine

A sheet-fed offset press separates, lifts and transports 15,000 sheets an hour with suction and blows them apart with air — and the pump that does both is usually one machine with a vacuum port and a pressure port. Combined vacuum-pressure dry vane pumps, side channel blowers on folders and die-cutters, oil-free because paper dust and ink mist meet in the same room, and sizing by sucker count for a B1 press and a corrugated converting line.

PackagingPaper & Printing
PVD coating and metallising: from rough vacuum to high vacuum in one cycle
7 min read

PVD coating and metallising: from rough vacuum to high vacuum in one cycle

A decorative chrome-look on a tap, a titanium nitride edge on a drill, an aluminium mirror inside a headlamp and the metallised film in a snack bag are all made by evaporating or sputtering metal in a chamber at 10⁻³ to 10⁻⁵ mbar. Every cycle crosses four decades of pressure, and each decade wants a different pump. Rough, fine and high-vacuum stages, batch coaters versus roll-to-roll metallisers, water vapour as the enemy, and the Dr.Vakuum set for a 2 m³ sputter chamber.

AutomotiveElectronicsPackaging
Beverage deaeration and beer bottling vacuum: oxygen is the enemy
7 min read

Beverage deaeration and beer bottling vacuum: oxygen is the enemy

Dissolved oxygen above 50 ppb shortens a beer's shelf life by months and oxidises juice colour and vitamin C; every modern filling hall fights it with vacuum. Deaeration of brewing and blending water, vacuum pre-evacuation of bottles and cans before CO₂ purge, and the pumps that do it wet, cold and oil-free — sized for a 40,000 bottle-per-hour line.

Food & BeveragePackaging
Vacuum pick-and-place, lifting and robotic handling: flow, not depth
7 min read

Vacuum pick-and-place, lifting and robotic handling: flow, not depth

Suction cups hold with pressure difference but survive with flow — porous cartons, sheet steel and bagged product each leak differently, and the generator must keep up. Cup sizing with safety factors, porous versus non-porous grip, when a central blower beats point-of-use ejectors, and the Dr.Vakuum 1SC and CB machines that do it.

ElectronicsPackaging
Vacuum packaging of frozen seafood and meat: sizing the chamber machine pump
7 min read

Vacuum packaging of frozen seafood and meat: sizing the chamber machine pump

Cycle time, not ultimate pressure, sizes a chamber vacuum packer — and frozen product adds a water-vapour load that oil-sealed pumps must be run correctly to survive. Sizing by chamber volume and cycles per hour, gas-flush MAP, and washdown-proof installation.

Food & BeveragePackaging
Vacuum in canning: can seaming, retort and juice deaeration
6 min read

Vacuum in canning: can seaming, retort and juice deaeration

The three vacuum duties in a cannery — headspace vacuum at the seamer, vacuum in the retort cycle, and deaeration of juices and purées — what pressure each needs, how to size for a 600-can-per-minute line, and why the seamer pump must be oil-free.

Food & BeveragePackaging
Sizing vacuum for thermoforming and MAP
7 min read

Sizing vacuum for thermoforming and MAP

Residual oxygen is arithmetic, not a pump specification. Why ultimate vacuum carries no selection information here, how to size on cycle time with the speed-curve and conductance de-rates, and the wet-product floor that no pump can pump past.

Food & BeveragePackaging