In the field
Applications
Sizing guides and application notes — how plant engineers across packaging, food & beverage, pharma, semiconductor and heavy industry specify Dr.Vakuum pumps and blowers, with the arithmetic shown.
Laboratory vacuum: rotary evaporators, filtration and central lab vacuum lines
A chemistry lab uses vacuum at three levels — 100–300 mbar for filtration and aspiration, 5–50 mbar for rotary evaporation, and below 1 mbar for drying and Schlenk work — and the water aspirator that once did the first two is being retired for water and cost reasons. Pumps per bench versus a central lab line, solvent vapour in oil-free and oil-sealed pumps, controllers and cold traps, and sizing for a 20-bench QC laboratory.
Vacuum distillation, short-path evaporation and vacuum crystallisation
Lowering the pressure lowers the boiling point, and that single fact is behind essential oil rectification, fatty acid and glycerine distillation, solvent recovery columns, short-path molecular stills for vitamin E and CBD, and the vacuum crystallisers that make salt, MSG and citric acid. What each needs from the vacuum system, why the column's own vapour never reaches the pump, and how a booster-plus-liquid-ring set covers the 1–50 mbar band.
Vacuum drying ovens and tray dryers for pharma and chemicals
A vacuum tray dryer removes solvent and water from a wet cake at 30–60 °C, where an API or a fine chemical survives — if the pump can hold the pressure against the vapour load and survive what the vapour is. Drying curves, the condenser that does most of the work, solvent recovery, oil-free versus oil-sealed near a GMP suite, and sizing for a 24-tray dryer.
Freeze drying: why the condenser, not the pump, sets the rate
One kilogram of ice per hour at 0.1 mbar is 10,800 m3/h of vapour — two orders of magnitude beyond any pump. Why the condenser does the pumping, why lower pressure dries slower, and the three ceilings a bigger pump cannot lift.