In the field
Applications
Sizing guides and application notes — how plant engineers across packaging, food & beverage, pharma, semiconductor and heavy industry specify Dr.Vakuum pumps and blowers, with the arithmetic shown.
Semiconductor back-end (OSAT): die attach, transfer moulding and wafer handling
Thailand's semiconductor industry is the back end — the assembly and test plants that take finished wafers and turn them into packaged chips. Vacuum handles the wafer on the dicing saw and the die on the bonder collet, pulls the voids out of the mould compound and the underfill, dries the parts before moulding and holds the strips on every stage. Shallow, clean, fast and continuous, with a few deep process steps — and the Dr.Vakuum DRV, CL and DSI pumps that serve them from the subfab.
High vacuum for coating and analytical instruments: turbo, cryo and the backing pump
Below 10⁻³ mbar the pump set becomes a system — a turbomolecular or cryogenic high-vacuum pump that cannot exhaust to atmosphere, and a backing pump whose curve decides how well the turbo works. Compression ratio, foreline pressure, cryopump regeneration and sizing the forevacuum for a sputter coater or an electron microscope.
Load-lock pump-down: sizing for semiconductor tools
Why the textbook pump-down formula under-sizes a load lock, how conductance and outgassing set the real requirement, why the primary must be dry, and the venting detail that governs particle counts more than the pump does.